Tempering steels
UNI EN 10132-3
Steels with high mechanical standards.This quality of steel has a percentage of carbon between 0,21% - 0,60% and a chemical analysis especially created to guarantee best performances after quenching and tempering. Such sort of steel is suitable for resisting to heavy load, hits, vibration and mechanical stress. Steel for quenching and tempering are characterized by the right balance between high tensile strength and toughness. The wide range of steel for quenching and tempering, which can be differentiated for various chemical analysis and therefore for level of hardenability, can be used for many applications and can satisfy all customer’s requirements.
Steel strip
| Grade | Thickness (mm) | Width (mm) | Condition |
|---|---|---|---|
| C22E | 0.20 – 14 | 12 – 650 | +A. +LC. +CR |
| C30E | 0.20 – 14 | 12 – 650 | +A. +LC. +CR |
| C35E | 0.20 – 14 | 12 – 650 | +A. +LC. +CR |
| C40E | 0.20 – 14 | 12 – 650 | +A. +LC. +CR |
| C45E | 0.20 – 14 | 12 – 650 | +A. +LC. +CR |
| C50E | 0.20 – 14 | 12 – 650 | +A. +LC. +CR |
| C55E | 0.20 – 14 | 12 – 650 | +A. +LC. +CR |
| C60E | 0.20 – 14 | 12 – 650 | +A. +LC. +CR |
| 25CrMo4 | 0.20 – 14 | 12 – 650 | +A. +LC. +CR |
| 34CrMo4 | 0.20 – 14 | 12 – 650 | +A. +LC. +CR |
| 42CrMo4 | 0.20 – 14 | 12 – 650 | +A. +LC. +CR |
Spools/Reels
| Thickness (mm) | Width (mm) | ||||
|---|---|---|---|---|---|
| 2-4 | 5-7 | 8-12 | 13-20 | 21-50 | |
| 0.08 - 0.14 | |||||
| 0.15 - 0.30 | |||||
| 0.31 - 0.40 | yes | yes | yes | yes | yes |
| 0.41 - 0.60 | yes | yes | yes | yes | yes |
| 0.61 - 1.00 | yes | yes | yes | yes | yes |
| 1.01 - 1.50 | yes | yes | yes | ||
| 1.51 - 2.00 | yes | yes | yes | ||
| 2.01 - 2.50 | yes | ||||
| 2.51 - 3.50 | |||||